不繡鋼材質1.4313是馬氏體級，耐腐化性強，熱正確治理 后持久性好。X3CrNiMo13-4鋼的自動化機械化特點是因此電學精分中鉬和鎳的高分子量。許多不繡鋼填加劑制約了加強級碳分子量的必須 ——給定滲透壓相對于奧氏體不繡鋼材質。總之鎳分子量不夠，但鎳分子量約為4%，特殊改善了鋼對各項腐化區域環境的減緩力——第二次自動化機械化特點。X3CrNiMo13-4鋼我們可加工將高達300℃在溫度表下運作的元器件和元器件，和露出在各項腐化區域環境中的元器件，同時實現足以的漆層因素括抗氯化物性能)。QT650.QT780和QT900因素下，熱正確治理 后最經常交由槽鋼。半的成品用作石油天然氣加工.化工類.在冶金工業和再生資源業，泄壓閥機露出在高一個溫和地溫下.泵.進行空調壓縮機結構件。鋼惡化的情況合電弧焊接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50供應信息EN1.4313馬氏體不銹鋼材質有著高頻淬火優點（+A）模式、高頻淬火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，需要哪一款 很大要跟項目說看不清楚哦。